Home → Resource

9th – Chemistry – Chapter 12 – Empirical Data Collection and Analysis

MCQs

  1. Which derived SI unit is used for volume?
    a) Meter (m) b) Liter (L) c) Cubic meter (m³) d) Millimeter (mm)
  2. Which unit is the SI base unit of mass?
    a) Gram (g) b) Pound (lb) c) Kilogram (kg) d) Ounce (oz)
  3. In which unit is the energy content of food usually measured?
    a) Kilojoules b) Megajoules c) Calorie d) Joule
  4. Which description shows both accuracy and precision?
    a) Hitting the same target but not the actual mark b) Hitting different places on the target c) Hitting the same mark repeatedly and being close to the actual target d) Missing the target completely
  5. In the SI system, what value does the prefix “kilo” stand for?
    a) 10⁻³ b) 10³ c) 10⁻⁶ d) 10⁶
  6. Which is the correct unit for measuring pressure?
    a) Newton (N) b) Pascal (Pa) c) Joule (J) d) Kelvin (K)
  7. Which statement about accuracy and precision is correct?
    a) Accuracy refers to closeness to the true value; precision refers to consistency b) Accuracy and precision mean the same thing c) Precision is more important than accuracy in science d) Accuracy depends on the number of measurements
  8. On what is the SI standard unit of mass based?
    a) The mass of 1 liter of water b) The mass of a block kept in France c) The mass of a cesium atom d) The mass of a cubic meter of air
  9. What is the consequence when two scientists measure with different units?
    a) They will get more accurate results b) They can still compare their results c) Their results may not be comparable d) Their measurement will always be incorrect
  10. Which one is an example of a systematic error?
    a) Reading a volume from a different angle each time b) Environmental factors affecting the measurement c) Slight variations in procedure d) A pipette delivering a slightly different volume than indicated
  11. Which of the following is NOT a commonly used system of units?
    a) SI System b) CGS System c) MKS System d) Binary System
  12. Which prefix stands for the smallest magnitude?
    a) Kilo b) Milli c) Nano d) Pico
  13. What is 65°C equal to on the Kelvin scale?
    a) 208 K b) 338 K c) 403 K d) 300 K
  14. How is precision defined in measurement?
    a) The closeness of results to the true value b) The number of measurements taken c) The accuracy of the instrument d) The closeness of measurements to each other
  15. What is 300 millimeters when converted correctly to meters?
    a) 0.03 m b) 0.3 m c) 3.0 m d) 0.300 m
  16. Which pair of quantities can be measured in the same unit?
    a) Heat and temperature b) Temperature and area c) Heat and work d) Length and work
  17. Write 0.000840 in scientific notation.
    a) 8.40×10⁻³ b) 840×10⁶ c) 8.40×10⁻⁴ d) 84.0×10⁵
  18. Which unit of volume is commonly used in chemistry?
    a) Millilitre b) Litre c) Cubic centimetre d) Cubic metre
  19. For what reason are SI units important in international research?
    a) They allow scientists to use different measurement systems b) They simplify communication and data comparison c) They eliminate the need for experimentation d) They replace the metric system
  20. What is the SI standard unit of time based on?
    a) The rotation of the Earth b) The vibration of a quartz crystal c) The radiation produced by the cesium-133 atom d) The speed of light
  21. Which is the SI unit of energy?
    a) Pascal (Pa) b) Joule (J) c) Newton (N) d) Watt (W)
  22. Which symbol represents the SI unit of mass?
    a) m b) kg c) s d) mol
  23. What makes SI units preferable in scientific communication?
    a) They are based on the number 12 b) They reduce the number of conversions needed c) They are harder to learn and remember d) They are only used in one country
  24. Which of these may be a cause of random errors?
    a) Misaligned measuring instrument b) Environmental factors c) Wrongly calibrated balance d) Incorrect unit conversion
  25. A student weighs an object three times and records 19.8 g, 20.5 g, and 19.6 g, while the true mass is 20 g. Is the measurement precise or accurate?
    a) Precise but not accurate b) Accurate but not precise c) Both precise and accurate d) Neither precise nor accurate
  26. Which is the SI unit for the amount of substance?
    a) Mole b) Gram c) Kilogram d) Litre
  27. Which unit is the SI base unit of force?
    a) Newton (N) b) Joule (J) c) Pascal (Pa) d) Watt (W)
  28. A student records mass values of 2.98 g, 3.00 g, and 2.99 g, but the actual mass is 3.50 g. What does this show?
    a) Accurate but not precise b) Precise but not accurate c) Both accurate and precise d) Neither accurate nor precise
  29. Which prefix corresponds to 10⁶?
    a) Kilo- b) Mega- c) Milli- d) Pico
  30. Which of the following is an example of a systematic error?
    a) Varying temperature causing measurement fluctuation b) Using a faulty weighing scale c) Taking multiple readings and getting different results d) Using a stopwatch in an experiment
  31. Which unit is used for temperature in the SI system?
    a) Fahrenheit (°F) b) Celsius (°C) c) Kelvin (K) d) Joule (J)
  32. In SI units, what value does the prefix “nano” represent?
    a) 10⁻⁷ b) 10⁻⁸ c) 10⁻⁹ d) 10⁻¹¹
  33. Why do chemists choose grams over kilograms to measure substances?
    a) Grams are easier to weigh in the lab b) Kilograms are too heavy to measure c) Grams are a non-SI unit d) It reduces systematic errors
  34. How can a measurement error be defined?
    a) The exact value of a measurement b) The process of measuring c) The difference between measured and actual value d) The total of all measured values
  35. Which type of error results from the limitations of measuring instruments?
    a) Human error b) Systematic error c) Random error d) Calculation mistake
  36. Which of the following is NOT a commonly used system of units?
    a) International System of Units (SI) b) Centimetre-gram-second System (CGS) c) Metre-kilogram-second System (MKS) d) Fahrenheit System
  37. How many base units does the SI system contain?
    a) 5 b) 7 c) 10 d) 12
  38. Which SI prefix correctly represents 0.000001 meters?
    a) 1 millimeter b) 1 micrometer c) 1 nanometer d) 1 picometer
  39. Which is the SI unit of temperature?
    a) Celsius b) Kelvin c) Fahrenheit d) Joule
  40. What name is given to the difference between the measured value and the actual value?
    a) Precision b) Accuracy c) Error d) Calibration
  41. Which formula converts Celsius into Kelvin?
    a) K=°C−273 b) K=°C×273 c) K=°C+273 d) K=°C/273
  42. What is the main benefit of using SI prefixes?
    a) They eliminate the need for scientific notation b) They help express very large or small values conveniently c) They increase measurement precision d) They reduce measurement errors
  43. Which type of error is caused by unpredictable changes during an experiment?
    a) Systematic error b) Random error c) Calibration error d) Human error
  44. Which is the SI unit of time?
    a) Minute b) Hour c) Second d) Day
  45. Which of the following is the SI unit of length?
    a) Kilogram b) Metre c) Second d) Kelvin
  46. Which prefix is used for 10⁹?
    a) Mega b) Pico c) Giga d) Tera
  47. Why is Celsius frequently preferred to Kelvin in chemistry?
    a) It has fewer decimal places b) It is easier to convert to Kelvin c) It is more accurate than Kelvin d) It measures absolute temperature
  48. A student weighs an object three times and gets 17.3 g, 17.4 g, and 17.2 g, while the true mass is 20 g. Is the measurement precise or accurate?
    a) Precise but not accurate b) Accurate but not precise c) Both precise and accurate d) Neither precise nor accurate
  49. Which type of error reduces the accuracy of a measurement?
    a) Random error b) Systematic error c) Human error d) Calibration error
  50. For what purpose do scientists use standardized units in measurements?
    a) To make calculations easier b) To improve international communication and collaboration c) To reduce the number of scientific experiments d) To increase measurement errors
  51. In an experiment, what does accuracy measure?
    a) The closeness of measurements to each other b) The number of measurements taken c) The precision of the instrument d) The closeness of results to the true value
  52. Which system of units is used across the world for scientific research?
    a) Imperial System b) CGS System c) SI System d) MKS System
  53. Which symbol stands for the prefix “milli”?
    a) m b) M c) µ d) n
  54. What is the chief advantage of using SI units?
    a) It makes unit conversion unnecessary b) It simplifies measurement for chemists c) It allows scientists to avoid calculations d) It is only used in physics
  55. What is meant by the triple point of water?
    a) The temperature at which water freezes b) The temperature at which water boils c) The temperature at which all three states of water coexist d) The temperature at which water evaporates
  56. What is the main reason standardized units are used in science?
    a) To make measurements more complex b) To facilitate communication and collaboration c) To increase the number of conversions needed d) To confuse scientists from different countries
  57. How is a mole defined in the SI system?
    a) The mass of 1 liter of water b) The amount of substance containing 6.022 x 10²³ particles c) The distance traveled by light in a vacuum d) The time taken for 9,192,631,770 cycles of radiation
  58. What quantity does a mole represent?
    a) Number b) Mass c) Volume d) Length
  59. How many grams make up 1 kilogram?
    a) 10 b) 100 c) 1000 d) 10000
  60. Which of these is a derived unit in the SI system?
    a) Metre b) Kilogram c) Cubic metre d) Mole
  61. Which of these is a base unit in the SI system?
    a) Newton b) Joule c) Metre d) Pascal
  62. Which SI prefix stands for 10⁶?
    a) Kilo b) Mega c) Giga d) Tera
  63. In measurement, what is the aim of any experiment?
    a) To increase errors b) To make measurements more complex c) To ignore systematic errors d) To obtain accurate and precise results
  64. Which statement about SI unit symbols is true?
    a) They change in plural forms b) They do not change in plural forms c) They are always capitalized d) They are always lowercase
  65. Which statement about precision and accuracy is true?
    a) Precision is dependent on accuracy b) Accuracy is dependent on precision c) Precision and accuracy are independent of each other d) Precision and accuracy are the same thing
  66. Which SI prefix represents 10⁻⁶?
    a) Milli b) Micro c) Nano d) Pico
  67. What is the SI unit of time?
    a) Minute (min) b) Hour (hr) c) Second (s) d) Millisecond (ms)
  68. How is 1 mole expressed in terms of Avogadro’s number?
    a) 3.14 × 10⁶ b) 6.022 × 10²³ c) 1.673 × 10⁻²⁷ d) 9.81 × 10⁴
  69. Which symbol denotes the kilogram in SI units?
    a) K b) k c) Kgm d) kg
  70. How is pressure expressed in SI?
    a) Newton per meter b) Newton per meter square c) Joule d) Pascal

Short Questions

(i) Can a measurement be precise but not accurate? Explain with an example.
(ii) What role does temperature play in chemical reactions?
(iii) Why is the metric system easier to use than other unit systems?
(iv) Why are SI base units interrelated?
(v) How many base units are there in the SI system?
(vi) Which other systems of measurement are used apart from SI units?
(vii) Can a measurement be accurate but not precise? Explain with an example.
(viii) Why does taking multiple readings improve accuracy?
(ix) Why is the mole an important unit in chemistry?
(x) Why do chemists use different measuring tools for different substances?
(xi) Why is the gram (g) preferred over the kilogram (kg) in chemistry?
(xii) How do chemists ensure both accuracy and precision in laboratory measurements?
(xiii) What is the reason behind a random error?
(xiv) Write the prefixes for 10⁶, 10³, and 10⁻³.
(xv) Why is the metric system preferred in scientific research?
(xvi) What are some common instruments that introduce systematic errors?
(xvii) Convert 250 cm to meters.
(xviii) Define metre.
(xix) Define the SI unit of temperature.
(xx) What are the five basic SI units which are used in Chemistry?
(xxi) What are the SI units of volume and density?
(xxii) How is temperature converted from Celsius to Kelvin?
(xxiii) What is the scientific notation for 0.000001?
(xxiv) Why are SI units user-friendly?
(xxv) What is the difference between error and uncertainty?
(xxvi) How do systematic and random errors affect accuracy and precision?
(xxvii) Define the term “mole” in chemistry.
(xxviii) Convert 1000 cm³ into liters.
(xxix) Why do scientists use standardized units in measurements?
(xxx) What is the SI unit of length? How is it defined?
(xxxi) Convert 0.02 km into meters.
(xxxii) Why do chemists prefer using cm³ instead of m³ for measuring volumes?
(xxxiii) Convert 0.005 kg to milligrams.
(xxxiv) List the five base SI units commonly used in chemistry.
(xxxv) Why does using different instruments lead to errors?
(xxxvi) Define accuracy in measurement.
(xxxvii) How do standard units contribute to technological advancements?
(xxxviii) Define precision in measurement.
(xxxix) What happens if systematic errors are not corrected in an experiment?
(xl) What is the SI unit of the amount of substance?
(xli) Elaborate on the importance of using SI units in space exploration.
(xlii) How do SI units improve scientific communication?
(xliii) If a reaction occurs at 350 K, what is the temperature in Celsius?
(xliv) Mention two benefits scientists get by using SI units.
(xlv) Define random error.
(xlvi) Explain the three units derived from the basic SI units.
(xlvii) Why is the Celsius scale used instead of Kelvin in chemistry?
(xlviii) Compare the units in the SI system with those in the MKS system.
(xlix) What is the meaning of the prefix “nano”?
(l) Convert 150 cm³ into cubic meters.
(51) If the boiling point of water is 100°C, what is it in Kelvin?
(52) Convert 300 K into Celsius.
(53) Explain why we prefer to use smaller units of mass and volume in Chemistry.
(54) A student measured a sample’s mass three times and obtained 5.2 g, 5.2 g, and 5.3 g, but the actual mass was 5.0 g. Is the measurement precise, accurate, or both?
(55) What are the benefits of using SI units in chemistry?
(56) What is the purpose of the International System of Units (SI)?
(57) What is meant by “measurement uncertainty”?
(58) Why is it difficult to compare scientific measurements if different units are used?
(59) Convert 5000 mm into meters.
(60) Define systematic error.
(61) Why is it important for scientists worldwide to use the same measurement units?
(62) What is the standard value of Avogadro’s number?
(63) What are the causes of random errors?
(64) Does systematic error affect the accuracy?
(65) What is the SI unit of time? How is it defined?
(66) What is the role of accuracy and precision in scientific experiments?
(67) Why is it necessary to have a common unit system in scientific research?
(68) What is consistency of results?
(69) Define systematic error and random error
(70) What is the importance of SI prefixes?
(71) What is the difference between reliability and reproducibility?
(72) What is the SI unit of mass? How is it defined?
(73) How can systematic errors be reduced?
(74) How do small measurement errors impact scientific experiments?
(75) What difficulties do we expect to encounter if we use different units of measurement in daily life?
(76) Convert 4.2 × 10⁻⁶ kg into grams.
(77) What is the importance of reproducibility in scientific experiments?
(78) Name three derived SI units used in chemistry.
(79) Convert 2.5 mg into kilograms.
(80) Convert 25°C into Kelvin.
(81) Define Pascal (Pa) as an SI unit of pressure.
(82) What would happen if different countries used different measurement systems in scientific research?
(83) How does the environment affect measurements?
(84) Why do we use derived units in chemistry?

Long Questions

  1. A substance has a molar mass of 58.5 g/mol. What is the mass of 2 moles of the substance?
  2. Can a student be both inaccurate and imprecise in their measurements?
  3. A measuring balance gives a reading of 19.8 g, 20.5 g, and 19.6 g for the mass of an object. Determine the average mass.
  4. How does taking measurements in SI units ensure safety and reliability?
  5. How can you avoid systematic errors in your measurements?
  6. What is the difference between accuracy and precision? Give examples.
  7. What are our indigenous units of measurement of mass, volume, and length?
  8. A sample contains 3.011 × 10²³ molecules of a substance. How many moles is this?
  9. Explain why chemists prefer certain SI units such as grams, cm³, and Celsius for measurements.
  10. Explain the difference between systematic and random errors. How can they be minimized?
  11. Describe the prefixes used in the SI system. How do they simplify large and small numerical values?
  12. Elaborate on the difference between precision and accuracy.
  13. Find the mass of 0.25 moles of a substance with a molar mass of 40 g/mol.
  14. Calculate the number of atoms in 0.5 moles of oxygen gas.
  15. Why is standardization important in scientific measurements? Discuss with examples.
  16. Discuss the methods used to reduce measurement errors in laboratory experiments.
  17. Why is the SI unit system preferred in chemistry over other unit systems?
  18. Describe the importance of accurate and precise measurements in scientific experiments.
  19. Define SI base units and derived units. Give examples of both types of units.
  20. A student weighs a sample three times and gets 17.3 g, 17.4 g, and 17.2 g. Calculate the mean value and discuss whether the results are precise.
  21. A student measures a liquid’s volume as 27 cm³, but the actual volume is 26 cm³. Calculate the percentage error.
  22. Explain the importance of SI units in chemistry. Why is it necessary to use a common unit system worldwide?

Answer Key

  1. c) Cubic meter (m³)
  2. c) Kilogram (kg)
  3. a) Kilojoules
  4. c) Hitting the same mark repeatedly and being close to the actual target
  5. b) 10³
  6. b) Pascal (Pa)
  7. a) Accuracy refers to closeness to the true value; precision refers to consistency
  8. b) The mass of a block kept in France
  9. c) Their results may not be comparable
  10. d) A pipette delivering a slightly different volume than indicated
  11. d) Binary System
  12. d) Pico
  13. b) 338 K
  14. d) The closeness of measurements to each other
  15. d) 0.300 m
  16. c) Heat and work
  17. c) 8.40×10⁻⁴
  18. c) Cubic centimetre
  19. b) They simplify communication and data comparison
  20. c) The radiation produced by the cesium-133 atom
  21. b) Joule (J)
  22. b) kg
  23. b) They reduce the number of conversions needed
  24. b) Environmental factors
  25. b) Accurate but not precise
  26. a) Mole
  27. a) Newton (N)
  28. b) Precise but not accurate
  29. b) Mega-
  30. b) Using a faulty weighing scale
  31. c) Kelvin (K)
  32. c) 10⁻⁹
  33. a) Grams are easier to weigh in the lab
  34. c) The difference between measured and actual value
  35. b) Systematic error
  36. d) Fahrenheit System
  37. b) 7
  38. b) 1 micrometer
  39. b) Kelvin
  40. c) Error
  41. c) K=°C+273
  42. b) They help express very large or small values conveniently
  43. b) Random error
  44. c) Second
  45. b) Metre
  46. c) Giga
  47. b) It is easier to convert to Kelvin
  48. a) Precise but not accurate
  49. b) Systematic error
  50. b) To improve international communication and collaboration
  51. d) The closeness of results to the true value
  52. c) SI System
  53. a) m
  54. b) It simplifies measurement for chemists
  55. c) The temperature at which all three states of water coexist
  56. b) To facilitate communication and collaboration
  57. b) The amount of substance containing 6.022 x 10²³ particles
  58. a) Number
  59. c) 1000
  60. c) Cubic metre
  61. c) Metre
  62. b) Mega
  63. d) To obtain accurate and precise results
  64. b) They do not change in plural forms
  65. c) Precision and accuracy are independent of each other
  66. b) Micro
  67. c) Second (s)
  68. b) 6.022 × 10²³
  69. d) kg
  70. d) Pascal

Leave a Reply

Your email address will not be published. Required fields are marked *