Home → Resource

9th – Chemistry – Chapter 13 – Laboratory And Practical Skills

MCQs

  1. Which type of chemical hazard may cause explosions?
    a) Corrosive chemicals b) Flammable chemicals c) Toxic chemicals d) Explosive chemicals
  2. What is the proper way to deal with a chemical fire?
    a) Panic and run b) Pour water over the fire c) Ignore it and continue working d) Use the fire extinguisher if trained to do so
  3. What is the effect on a person who is exposed to high doses of radiation?
    a) Rapid muscle growth b) Vomiting and radiation burns c) Increased vision clarity d) Reduction in body temperature
  4. What action should be taken when a fire drill occurs in the lab?
    a) Run to the safety shower b) Climb into the fume cupboard c) Close gas valves and turn off all equipment d) Carry chemicals out of the lab
  5. How should acids be mixed with water correctly?
    a) Add water to acid b) Add acid to water slowly c) Shake the mixture vigorously d) Add both simultaneously
  6. How should hazardous waste be disposed of correctly?
    a) Pour it down the drain b) Throw it in the trash bin c) Store it in a refrigerator d) Transport it to a hazardous waste disposal site
  7. What does the label “corrosive” on a chemical bottle tell you?
    a) That the material is an oxidizing agent b) That the material can degrade rapidly upon exposure c) That its contact destroys living tissue d) That the chemical can explode
  8. How should a chemical spill on the floor be handled correctly?
    a) Ignore it and continue working b) Clean it up immediately with a mop c) Follow the safety procedures outlined in the lab manual d) Pour water over the spill
  9. How should a chemical explosion be handled correctly?
    a) Panic and run b) Stay calm and alert others c) Ignore it and continue working d) Use the fire extinguisher immediately
  10. What is the usual cause of accidents?
    a) Making mistakes b) Failure to use common sense c) Failure to follow instructions d) All of the above
  11. For what purpose are hazard signs displayed in the laboratory?
    a) To decorate the lab b) To indicate specific safety precautions c) To confuse students d) To replace PPE
  12. Which one of these is NOT a toxic chemical?
    a) Mercury b) Benzene c) Ammonia d) Sodium chloride
  13. How should a chemical splash in the eyes be handled correctly?
    a) Rub the eyes vigorously b) Apply ointment immediately c) Ignore it and continue working d) Wash the eyes with water for at least 15 minutes
  14. What is the proper first response when a chemical splashes into the eyes?
    a) Rub the eyes vigorously b) Wash the eyes with water for at least 15 minutes c) Apply ointment immediately d) Ignore it and continue working
  15. What is expected of students during an emergency in the laboratory?
    a) Panic and scream b) Stay calm and alert others c) Ignore the situation d) Run out of the laboratory
  16. Which one of these is an example of an explosive chemical?
    a) Benzene b) Picric acid c) Acetone d) Nitrogen
  17. How should a chemical spill be dealt with correctly?
    a) Ignore it and continue working b) Clean it up immediately with a mop c) Follow the safety procedures outlined in the lab manual d) Pour water over the spill
  18. What must be done before carrying out experiments with reactive chemicals?
    a) Conduct experiments in an open area b) Wear gloves and use shields c) Increase the quantity of chemicals used d) Avoid using glass equipment
  19. For what reason is PPE important in a laboratory?
    a) To protect against chemical exposure b) To conduct faster experiments c) To impress the instructor d) To improve grip on glassware
  20. What is the right way to respond to a chemical fire?
    a) Panic and run b) Use the fire extinguisher if trained to do so c) Pour water over the fire d) Ignore it and continue working
  21. Why are warning signs important in the laboratory?
    a) They are for decoration b) They indicate potential hazards c) They are required by law d) They are optional
  22. Which one of the following is an example of a radioactive material?
    a) Benzene b) Hydrogen cyanide c) Gamma rays d) Sodium chloride
  23. How should a chemical spill on the skin be dealt with correctly?
    a) Ignore it and continue working b) Wash the affected area with soap and water c) Apply a neutralizing agent immediately d) Pour water over the affected area
  24. Which one is an example of a self-reactive chemical?
    a) Potassium b) Acetic acid c) Potassium permanganate d) Picric acid
  25. What step should be taken before beginning an experiment?
    a) Randomly mix chemicals b) Ignore potential hazards c) Taste the chemicals to test purity d) Check all equipment for proper functionality
  26. Which one of these is an example of an explosive chemical?
    a) Acetone b) Nitrocellulose c) Hydrogen peroxide d) Sodium chloride
  27. Which one of these is an example of a corrosive chemical?
    a) Benzene b) Hydrofluoric acid (HF) c) Nitrogen d) Benzoyl peroxide
  28. For what reason should emergency drills be held in the lab?
    a) To waste time b) To train students for real emergencies c) To increase participation in lab activities d) To create excitement
  29. How should a case of chemical inhalation be handled correctly?
    a) Ignore it and continue working b) Remove the person from the contaminated area and call for medical help c) Pour water over the person d) Apply a neutralizing agent
  30. What is the reason for keeping toxic chemicals in their original containers?
    a) To prevent accidental ingestion b) To make them look organized c) To increase reactivity d) To make disposal easier
  31. Which one of these is a safety precaution when handling toxic chemicals?
    a) Work alone b) Work in a fume hood c) Use the largest quantity possible d) Store toxic chemicals in an open container
  32. What is the reason flammable liquids are not kept in a refrigerator?
    a) They can freeze b) They can explode c) They can evaporate d) They can react with other chemicals
  33. Which safety precaution applies to handling asphyxiant chemicals?
    a) Use them in a poorly ventilated area b) Store them in a closed container c) Use them without protective clothing d) Expose yourself to high doses of the chemical
  34. What is the main danger posed by asphyxiant chemicals?
    a) Radiation burns b) Suffocation c) Explosions d) Skin irritation
  35. How should acid and alkali waste be disposed of correctly?
    a) Pour it down the drain without neutralization b) Neutralize it first and then dispose of it down the drain c) Throw it in the trash bin d) Store it in a refrigerator
  36. Which one is an example of a highly toxic chemical?
    a) Ethanol b) Phenol c) Potassium cyanide d) n-Hexane
  37. Why is personal protective equipment (PPE) important in a laboratory?
    a) To enhance appearance b) To protect against chemical exposure c) To increase experiment speed d) To avoid laboratory attendance
  38. Which one of these gases is an asphyxiant?
    a) Carbon monoxide b) Oxygen c) Hydrogen peroxide d) Sulfuric acid
  39. What should students do on noticing that a fire extinguisher is not in proper working order?
    a) Ignore it and continue working b) Report it to the lab instructor immediately c) Fix it themselves d) Use it anyway
  40. Which chemical is flammable?
    a) Benzene b) Sulfuric acid c) Sodium chloride d) Water
  41. What is the initial step in dealing with a chemical emergency?
    a) Panic and call for help b) Use the fire extinguisher immediately c) Alert people in the area to evacuate d) Ignore the situation
  42. Which one of these is NOT a safety precaution for handling flammable chemicals?
    a) Use the smallest quantity possible b) Conduct experiments in a fume hood c) Store flammable liquids in a refrigerator d) Keep flammable compounds away from heat sources
  43. Which one of these is NOT an example of PPE?
    a) Lab coat b) Face shield c) Safety glasses d) Regular clothes
  44. What message does the warning sign “caution” give?
    a) The area is safe b) There is no danger c) There is a potential hazard d) The area is for authorized personnel only
  45. Which one of these is an explosive chemical?
    a) Benzene b) Picric acid c) Hydrochloric acid d) Sodium chloride
  46. How should a fire emergency be dealt with?
    a) Panic and run b) Use a fire extinguisher and evacuate c) Continue the experiment d) Pour water on all chemicals
  47. How should a chemical burn be handled correctly?
    a) Apply ointment immediately b) Wash the affected area with soap and water c) Ignore it and continue working d) Cover the burn with a cloth
  48. In what circumstances are explosive chemicals likely to explode?
    a) When exposed to light b) When exposed to shock or heat c) When stored in a cool place d) When stored in a closed container
  49. In what kind of place should the fire extinguisher be kept in the laboratory?
    a) In a hidden corner b) Outside the laboratory c) Inside a locked cabinet d) In a visible and accessible place
  50. For what reason should students know where fire extinguishers are located?
    a) To use in case of a fire emergency b) To clean equipment c) To increase oxygen supply d) To mix with chemicals
  51. What is the right action if students come into contact with a hazardous chemical?
    a) Ignore it and continue working b) Wash the affected area with soap and water c) Apply a neutralizing agent immediately d) Pour water over the affected area
  52. Which one of these is NOT a radiation safety measure?
    a) Wearing protective clothing b) Using radiation shields c) Prolonged exposure to radiation d) Monitoring radiation exposure
  53. Which one of these is a flammable chemical?
    a) Water b) Benzene c) Hydrochloric acid d) Sodium chloride
  54. What is the safe way to smell a gas in the lab?
    a) Inhale directly from the container b) Hold your breath and smell quickly c) Avoid smelling altogether d) Waft the fumes toward your nose
  55. How is safety in the chemistry laboratory best described?
    a) The responsibility of the students only b) The responsibility of the professor only c) The responsibility of the lab in-charge only d) A shared responsibility
  56. Which one of these is an example of an asphyxiant chemical?
    a) Benzene b) Hydrogen cyanide c) Hydrochloric acid d) Sodium chloride
  57. What is the rule when diluting an acid with water?
    a) Do it quickly b) Do not stir the container c) Always add water to acid d) Always add acid to water
  58. What does the label “Warning” on a chemical bottle signify?
    a) That the chemical can cause less serious injury b) That the chemical can cause serious injury c) That users should be careful when using the chemical d) That users should open it only in the presence of a teacher
  59. How should you act if you suspect that a chemical might explode?
    a) Move the container quickly b) Pour it down the drain c) Do not attempt to move the container d) Heat the container
  60. How should a chemical spill on the skin be dealt with correctly?
    a) Ignore it and continue working b) Apply a neutralizing agent immediately c) Pour water over the affected area d) Wash the affected area with soap and water
  61. Which safety equipment is needed when handling toxic chemicals?
    a) Gloves and masks b) Sandals and T-shirt c) Apron and face shield only d) Safety glasses only
  62. For what reason is PPE important in the laboratory?
    a) It is only for decoration b) It protects against hazardous chemicals c) It is required by law d) It is optional
  63. Which one of these is NOT a type of chemical hazard in the lab?
    a) Flammable hazards b) Corrosive hazards c) Electrical hazards d) Radiation hazards
  64. Around what temperature is the flashpoint of flammable chemicals?
    a) 0°C b) Room temperature c) 100°C d) 200°C
  65. What does the “Caution” sign indicate?
    a) There is no danger b) Be alert and take precautions c) All chemicals are safe to use d) No PPE is required
  66. Which type of radiation is produced by medical X-rays?
    a) Alpha radiation b) Beta radiation c) Gamma radiation d) Ionizing radiation
  67. What should be done while working with flammable chemicals?
    a) Store them in a refrigerator b) Keep them away from heat sources c) Mix them with water for safety d) Use large quantities
  68. What is the right action if you come into contact with a corrosive chemical?
    a) Wash the affected area with soap and water b) Apply a neutralizing agent immediately c) Ignore it and continue working d) Pour water over the affected area
  69. What action should students take upon noticing a fire in the laboratory?
    a) Panic and run b) Ignore it and continue working c) Use water to put out the fire d) Close doors to confine the fire
  70. For what reason should students avoid working alone in the lab?
    a) To prevent unauthorized access b) To complete experiments faster c) To maintain discipline d) To avoid accidents without immediate assistance
  71. Which safety precaution applies to handling reactive chemicals?
    a) Use them in large quantities b) Store them with other chemicals c) Use heavy gloves and a shield d) Use glass equipment without shielding
  72. Which one of these is an example of personal protective equipment (PPE)?
    a) Lab coat b) Sneakers c) T-shirt d) Shorts
  73. Is it permitted to wear contact lenses in the laboratory?
    a) Yes, always b) No, never c) Only if you wear safety glasses d) Only if you are not handling chemicals
  74. Which safety precaution applies to handling radioactive materials?
    a) Expose yourself to radiation for long periods b) Operate radiation-producing equipment without training c) Keep radioactive sources shielded d) Touch radioactive materials with bare skin
  75. Which one of these is a reactive chemical?
    a) Sodium b) Ethanol c) Distilled water d) Carbon dioxide
  76. Which one of these is an example of a reactive chemical?
    a) Benzene b) Calcium hydride c) Hydrochloric acid d) Sodium chloride

Short Questions

(i) How should fires caused by chemicals be handled?
(ii) Why is it advised not to bring food items into the laboratory?
(iii) Why are hazard signs important in a laboratory?
(iv) Why is wearing gloves important in a chemistry lab?
(v) What actions should be taken if a fire breaks out in the laboratory?
(vi) What would happen if a toxic chemical was inhaled in large amounts?
(vii) What precautions should be taken when seeing a “Reactive” hazard sign?
(viii) Where should warning signs be placed in a laboratory?
(ix) What is ionizing radiation?
(x) Why is it necessary to store reactive chemicals separately?
(xi) A few decades ago, a tanker carrying poisonous chlorine gas leaked, and the gas spread over a large area in Lahore. The accident killed a few people as well as animals. Give some concrete proposals to avoid such an accident in the future.
(xii) Why should emergency drills be conducted in the laboratory?
(xiii) Why should toxic chemicals be stored in their original containers?
(xiv) What is the purpose of personal protective equipment (PPE) in a laboratory?
(xv) What type of reactions should be carried out in a fume cupboard?
(xvi) What precautions should be taken while performing reactions with reactive chemicals?
(xvii) Name any three examples of PPE.
(xviii) Name some corrosive chemicals.
(xix) How will you handle an emergency caused by a fire due to short-circuiting?
(xx) What precautions should be taken before starting any laboratory experiment?
(xxi) What should you do if you accidentally smell a gas?
(xxii) What should you do in case of a chemical spill in the lab?
(xxiii) What type of fire extinguisher is used in chemical laboratories?
(xxiv) Why is it necessary to wash hands after handling toxic chemicals?
(xxv) Why should students not work alone in the lab?
(xxvi) What should be done if someone inhales an asphyxiant gas?
(xxvii) What would happen if asphyxiant gases leaked into a closed room?
(xxviii) What are explosive chemicals? Give examples.
(xxix) Indicate two safety instructions required to avoid radiation.
(xxx) What is an asphyxiation hazard? Give examples.
(xxxi) What precautions should be taken while working with corrosive chemicals?
(xxxii) Why is it dangerous to store flammable liquids in a refrigerator?
(xxxiii) Why are signs and symbols posted on lab equipment and chemical bottles?
(xxxiv) How do radioactive materials affect living tissues?
(xxxv) What are corrosive chemicals? How do they affect the human body?
(xxxvi) Can you identify warning symbols posted for radiation and asphyxiant chemicals?
(xxxvii) What safety measures should be taken while handling flammable chemicals?
(xxxviii) Why can sudden shock cause some chemicals to explode?
(xxxix) Why is crowding in the laboratory discouraged?
(xl) What are the different types of chemical hazards in a laboratory?
(xli) What is PPE?
(xlii) When should a face shield be used instead of safety glasses?
(xliii) Why are emergency drills important to face emergency situations?
(xliv) Why is it important to recognize chemical hazard signs in the lab?
(xlv) What are the safety precautions when working with toxic chemicals?
(xlvi) How should laboratory equipment be checked before use?
(xlvii) What are flammable chemicals? Give examples.
(xlviii) Why are asphyxiant gases dangerous?
(xlix) Why should chemical bottles have warning labels?
(l) Why should students be trained in handling lab equipment before performing experiments?
(51) Which chemicals can cause suffocation?
(52) What does the “Caution” sign indicate?
(53) What type of damage can reactive chemicals cause?
(54) Why should emergency showers be available in the laboratory?
(55) What are toxic chemicals? Give examples.
(56) What is the importance of emergency procedures in the lab?
(57) How does ionizing radiation affect the human body differently from non-ionizing radiation?
(58) Put forward at least two suggestions to improve safety in the lab.
(59) What type of safety precautions are adopted to avoid damage due to explosive chemicals?
(60) Why should radioactive sources be shielded?
(61) Why is it important to know the location of a fire extinguisher in a lab?
(62) What should you do if you suspect a chemical to be explosive?
(63) What are reactive chemicals? Give examples.
(64) Why should concentrated acid be added slowly to water instead of vice versa?

Long Questions

  1. Discuss in detail the effects of corrosive and toxic chemicals on the human body and their safety precautions.
  2. A reaction between two chemicals produces a gas at a rate of 0.2 L/s. How much gas will be produced in 10 minutes?
  3. A chemical reaction releases 150 J of energy in 5 seconds. Calculate the power of the reaction.
  4. The concentration of a toxic gas in a laboratory is 0.05 ppm. If the exposure limit is 0.02 ppm, by what factor does the concentration exceed the limit?
  5. Explain the effects of radiation exposure on human health.
  6. Explain the importance of warning signs and symbols to avoid accidents in the lab.
  7. A certain radioactive material has a half-life of 8 days. If 100 g of the material is initially present, how much will remain after 24 days?
  8. Write down five common safety instructions used to avoid all types of hazards.
  9. Discuss the importance of PPE in the laboratory and describe its different types.
  10. Explain hazards due to explosive and toxic chemicals.
  11. A gas cylinder contains 5 moles of hydrogen gas at 300 K. Calculate the total kinetic energy of the gas molecules using the kinetic theory of gases.
  12. A certain chemical solution has a pH of 3. If the concentration of H⁺ ions increases 10 times, what will be the new pH?
  13. Describe the safety precautions necessary for handling flammable, explosive, and reactive chemicals.
  14. What are the major causes of laboratory accidents, and how can they be prevented?
  15. A student has spilled a corrosive and explosive chemical due to an accident. Which emergency measures will you take to tackle the situation?
  16. Explain the different types of chemical hazards in the laboratory with examples.
  17. How can emergencies in the laboratory be managed?
  18. Name some toxic chemicals. Describe the effects of spreading toxic gas in the lab.
  19. What are hazard signs? Explain the importance of different hazard signs in a laboratory.
  20. A radioactive sample emits radiation at a rate of 500 Bq. After 10 hours, the radiation intensity drops to 125 Bq. Determine the half-life of the radioactive material.

Answer Key

  1. d) Explosive chemicals
  2. d) Use the fire extinguisher if trained to do so
  3. b) Vomiting and radiation burns
  4. c) Close gas valves and turn off all equipment
  5. b) Add acid to water slowly
  6. d) Transport it to a hazardous waste disposal site
  7. c) That its contact destroys living tissue
  8. c) Follow the safety procedures outlined in the lab manual
  9. b) Stay calm and alert others
  10. d) All of the above
  11. b) To indicate specific safety precautions
  12. d) Sodium chloride
  13. d) Wash the eyes with water for at least 15 minutes
  14. b) Wash the eyes with water for at least 15 minutes
  15. b) Stay calm and alert others
  16. b) Picric acid
  17. c) Follow the safety procedures outlined in the lab manual
  18. b) Wear gloves and use shields
  19. a) To protect against chemical exposure
  20. b) Use the fire extinguisher if trained to do so
  21. b) They indicate potential hazards
  22. c) Gamma rays
  23. b) Wash the affected area with soap and water
  24. d) Picric acid
  25. d) Check all equipment for proper functionality
  26. b) Nitrocellulose
  27. b) Hydrofluoric acid (HF)
  28. b) To train students for real emergencies
  29. b) Remove the person from the contaminated area and call for medical help
  30. a) To prevent accidental ingestion
  31. b) Work in a fume hood
  32. b) They can explode
  33. b) Store them in a closed container
  34. b) Suffocation
  35. b) Neutralize it first and then dispose of it down the drain
  36. c) Potassium cyanide
  37. b) To protect against chemical exposure
  38. a) Carbon monoxide
  39. b) Report it to the lab instructor immediately
  40. a) Benzene
  41. c) Alert people in the area to evacuate
  42. c) Store flammable liquids in a refrigerator
  43. d) Regular clothes
  44. c) There is a potential hazard
  45. b) Picric acid
  46. b) Use a fire extinguisher and evacuate
  47. b) Wash the affected area with soap and water
  48. b) When exposed to shock or heat
  49. d) In a visible and accessible place
  50. a) To use in case of a fire emergency
  51. b) Wash the affected area with soap and water
  52. c) Prolonged exposure to radiation
  53. b) Benzene
  54. d) Waft the fumes toward your nose
  55. d) A shared responsibility
  56. b) Hydrogen cyanide
  57. d) Always add acid to water
  58. b) That the chemical can cause serious injury
  59. c) Do not attempt to move the container
  60. d) Wash the affected area with soap and water
  61. a) Gloves and masks
  62. b) It protects against hazardous chemicals
  63. c) Electrical hazards
  64. b) Room temperature
  65. b) Be alert and take precautions
  66. d) Ionizing radiation
  67. b) Keep them away from heat sources
  68. a) Wash the affected area with soap and water
  69. d) Close doors to confine the fire
  70. d) To avoid accidents without immediate assistance
  71. c) Use heavy gloves and a shield
  72. a) Lab coat
  73. b) No, never
  74. c) Keep radioactive sources shielded
  75. a) Sodium
  76. b) Calcium hydride

Leave a Reply

Your email address will not be published. Required fields are marked *